Beaver Fencing

New schemes are re-introducing beavers in all areas of the UK and Tornado Wire have been working with associations to ensure the animals are contained safely and securely.
 
Combining the RL19/180/5 C14 with RL11/100/5 C10 anti-dig skirt creates a two-piece beaver fence.
The net has pre-stripped ends for ease of joining. It features solid vertical wires, commonly referred to as “stiff-stay”, and the unobtrusive high pressure bonded Torus knot which does not have any sharp edges. The spring like properties of a high tensile wire help the netting stay tight, keeping maintenance to a minimum.
 
Specification:
Number of line wires 19 
Overall height 180cm
Distance between stay wires 5cm
Top & bottom line wire specification 2mm diameter - 1100 - 1250N/mm2
Intermediate line wire specification 2mm diameter - 1100 - 1250N/mm2
Vertical stay wire specification 2mm diameter - 695 - 1250N/mm2
Approx. weight per 100m roll 158kg
Material composition heavily galvanised steel wire
 
British & European Standards
BSEN 10218 BSEN 10223 BSEN 10244
 
Ground Contact
Zinc and zinc aluminium coated agricultural fence service life can be affected significantly when exposed to extremely acidic or saline environments and this factor should be considered when designing your fence installation. For typical service life to be achieved it is recommended that the product must be installed in an atmosphere with corrosively class C1, C2 or C3 (very low/low/medium) in accordance with ISO 9223 and must not come into contact with substances that will accelerate corrosion, including but not limited to fertilisers, pesticides, herbicides, salt water and soils of pH lower than 5.5. Particularly at sites with peaty and wet ground conditions it is recommended that you have the soil pH tested prior to designing your installation.